Skip to main content
Cost guide · water heating

What a hot water tank replacement costs in Vancouver

Most hot water tank replacements in Metro Vancouver cost $1,800–$3,200 installed. That includes the tank, installation, the permit, and hauling the old one away. Larger tanks and heat pump units cost more, and access or venting problems can add $500–$1,500.

These are market ranges for Metro Vancouver, not a quote. They’re here so you can plan and compare, and they’re reviewed quarterly.

Market range · Metro Vancouver⁨$1,800–$3,200
The ranges

What it costs

JobTypical installed
40 gal / 150L gas
Typical installed ⁨$1,800–$2,600
50 gal / 190L gas
Typical installed ⁨$2,100–$3,200
40 gal electric
Typical installed ⁨$1,600–$2,400
50 gal electric
Typical installed ⁨$1,900–$2,800
60–75 gal⁩
Typical installed ⁨$2,800–$4,500
Heat pump (hybrid) electric
Typical installed ⁨$3,500–$6,000⁩ before rebates
Commercial high-recovery
Typical installed Quoted per system
These are market ranges for Metro Vancouver, not a quote. They’re here so you can plan and compare, and they’re reviewed quarterly. Big jobs genuinely vary — access, materials, what’s behind the wall, what’s above the pipe. We won’t quote one without seeing it, and neither should anyone else. Where we publish a fixed price, it’s fixed.
What moves the price

What decides where in the range you land

Size

The single biggest factor, and it should be decided by household size and fixture count rather than by what was there before. 40 gal suits one to two people; 50 suits three to four with two bathrooms; 60–75 suits larger households or simultaneous showers. A soaker tub can empty a tank in one fill.

Access

An open garage or basement is straightforward. A third-floor condo closet, a tight crawlspace, or anywhere the old tank has to be carried through finished rooms costs more — and in a tower, elevator booking and corridor protection are real line items.

Venting

If you're moving from a mid-efficiency to a high-efficiency unit, or the existing venting doesn't meet current requirements, expect $300–$1,000.

Electrical

Electric tanks sometimes need circuit work. Heat pump water heaters usually need a dedicated 240V circuit.

Expansion tank

Required where the supply has a backflow preventer or pressure-reducing valve, which is most newer installations. $200–$400 if you need one and don't have one.

Pre-existing problems

Occasionally we find the previous install wasn't done to code — missing seismic strapping, an incorrect T&P discharge, or improper venting. That has to be corrected before the new tank can pass inspection.

Questions

What people ask us

How much is a hot water tank in Vancouver?

$1,800–$3,200 installed for most homes.

Is the permit included?

In our price, yes. Check any other quote.

Can it be done same day?

Usually, for common sizes.

Does a bigger tank cost much more?

Going 40 to 50 gallons is typically $200–$400. Going to 75 is a bigger step.

What about a heat pump water heater?

$3,500–$6,000 before rebates, and it needs the right space.

SECOND OPINION

Got a quote you want checked?

Send it to [email protected]. We’ll tell you whether it’s fair, including when it is — and if the quote you already have is the one to take, we’ll say so.

Get a price

You’ll have the price in writing before we start.

Tell us what’s going on and we’ll come back with a number. It doesn’t move while we’re in your home.

No obligation. Emergencies answered around the clock.
  • Written quote before we start
  • $169/hr at any hour · no call-out fee
  • Permit included in the quote, not added afterward
  • Backed by our written workmanship guarantee
Call PantherBook Online